| Takeaway | Detail |
|---|---|
| The 2026 top-up is a 17-row verification problem, not one fee decision. | The thesis requires a 17-row state-by-state worksheet before any unitary patent renewal top-up is paid. |
| No top-up is payable until each state row has six completed fields. | Required fields: official fee, currency, VAT, due date, grace rule, and payment evidence. |
| A blank state row triggers the Article 135(1) EPC fallback. | The reader rule says conversion under Article 135(1) EPC is the fallback whenever any state row is blank. |
| A state row outside unitary coverage also triggers conversion. | The thesis names conversion under Article 135(1) EPC as the fallback when a row is outside unitary coverage. |
The guide answers the headline by treating the 17-state 2026 top-up as 17 separate renewal-fee verifications, each with official fee, currency, VAT, due date, grace rule, and payment evidence.
That answer changes if any state row is blank or outside unitary coverage, because Article 135(1) EPC conversion becomes the fallback.

How top-up and conversion actually work
The two mechanisms are procedurally different, and the difference matters before any money moves. On the unitary route, the practical check is to verify the current renewal schedule and payment window on the official EPO/UPC page before modeling any top-up, and to confirm on that page how the unitary renewal fee is structured. That is a unitary-right maintenance step, not a request to any national office to grant a separate national patent.
On the conversion route, Article 135(1) EPC, as reproduced in the EPO conversion guidance, says the central industrial property office of a designated contracting state may apply the procedure for the grant of a national patent at the request of the applicant for or proprietor of the European patent. The procedural record is different: identify the requested states and the receiving national office for each one. You are not merely confirming a renewal payment channel; you are putting a national grant procedure in motion through the relevant national authority.
That distinction is the procedural difference between a unitary renewal top-up and an Article 135(1) EPC conversion request: the first is checked against the official unitary renewal schedule and payment window, while the second is checked against the national office that will apply a national grant procedure after the applicant’s request.
Terminology can create a false equivalence here. A renewal top-up is framed around maintaining a right within the unitary system; an Article 135(1) request is framed around conversion into a national procedure. When the two are discussed in the same breath, the word “conversion” can sound like a payment workaround. The EPO text does not support that shortcut: it describes a national office applying a grant procedure at the applicant’s request, not a payment reclassification.
The working rule is therefore sequence-first. Check the official EPO/UPC renewal schedule and payment window for the unitary route. Separately, for any state row being handled through Article 135(1), record the requested state and the receiving central industrial property office. Only then compare the two procedural paths. If the official unitary source does not supply a needed figure or date, treat that as a verification gap and check the official source again rather than importing a number from a national conversion discussion.

Evidence: 17-state premise vs 18 members
This section alone reconciles the 17-state headline with the 18-member-state UPC snippet and the EPO no-fragmented-renewal statement. Treat the mismatch as an evidence problem before treating it as a payment problem. The three snippets are not interchangeable: one describes the renewal-fee structure, one describes court membership, and one describes a request-driven national procedure. None of them, by itself, gives you a payable 2026 top-up amount.
Start with the official EPO Unitary Patent page and check what it says about how the unitary renewal fee is structured. That supports a verification rule, not a shortcut: check one official schedule and confirm what it covers. It does not support assuming one amount, one due date, or one payment result across every state row. Any statement that the renewal mechanism differs from national renewal tells you the mechanism is different; it does not supply the amount you owe.
Then reconcile the state count. Check the official UPC/EPO member-state list and compare it against the headline’s 17-state 2026 top-up. Before totaling anything, identify which state in the official list is absent from the 17-state worksheet, or confirm that the two lists use different scopes. Do not resolve the discrepancy by rounding, inference, or assuming that the missing state is immaterial. A one-state mismatch is exactly the kind of blank row that turns a headline into an unverified payment.
The EPO Article 135(1) EPC material, quoted above, adds the fallback rule: conversion is request-driven and national, not an automatic fee switch triggered by a blank cell. Capture that distinction in the worksheet: a unitary renewal top-up is a payment route tied to the unitary schedule, while an Article 135(1) EPC conversion is a procedure that must be requested in the relevant state.

Top-up vs conversion: explicit winner
Here is the explicit winner rule, and it applies only after the worksheet is finished: the top-up wins on a complete 17-row worksheet, and conversion is the fallback whenever any row is blank or outside unitary coverage. I am not treating the headline as a fee decision. I am treating it as a verification decision, because the payment choice is downstream of the worksheet.
The comparison is mechanical. A completed worksheet means every state row has an official fee, currency, VAT treatment, due date, grace rule, and payment evidence. If those fields are filled and the commercial states match unitary coverage, the top-up is the winner. If a row is blank, or a key commercial state sits outside unitary coverage, the worksheet has failed and the top-up is not the winner.
| Route | Wins when | Loses when |
|---|---|---|
| Top-up | All 17 rows are verified; unitary coverage matches the commercial states; the official fee schedule is captured with date, currency, and VAT treatment. | Any state is outside coverage, or any row is blank. |
| Conversion | Any row is blank, a national office requires a local agent, or unitary coverage excludes a key state. | Used as a default without checking Article 135(1) EPC mechanics. |
Conversion is not a shortcut around the worksheet. As quoted above from the EPO material on conversion of European patent applications or patents, Article 135(1) EPC makes conversion a formal, request-driven national procedure with its own mechanics, not a label for “pay nationally instead.” If the worksheet is incomplete, conversion becomes the fallback only after those mechanics are checked.
The practical rule is narrow: do not let a default answer win. Top-up wins only on a complete 17-row worksheet with coverage alignment and a captured official fee schedule. Conversion wins when the worksheet exposes a blank, a local-agent requirement, or a key state outside unitary coverage. If none of those conditions is documented, the winner is not yet declared.

Costs and numbers to capture per state
This section alone lists the six cost fields and the 17-row count that must be captured before comparing routes. I treat the headline’s 17-state 2026 top-up as a worksheet instruction, not as a payment instruction. Before any renewal money moves, I want one row per state and the same six fields in every row: official fee amount, currency, VAT treatment, due date, grace or reinstatement rule, and payment evidence. If a field is blank, the worksheet is not complete.
I do not put a fee amount into the worksheet from memory or from a secondary summary. I read the official schedule on the date checked and record the source next to the amount. The official fee amount is not just a number; it is a number tied to a currency, a VAT treatment, and a due date. A row that says only “fee paid” is not usable, because it does not show whether the amount matched the official schedule, whether VAT was handled correctly, or whether the payment landed by the relevant date.
I use the 17 rows from the headline as a checklist, not as a fact. The reason is simple: a checklist can be tested, while an unverified count can quietly drive the wrong total. I reconcile the rows against the 18-member-state UPC snippet before totaling anything. That reconciliation belongs to the evidence work, not to the arithmetic. Once the row set is settled, I total only from completed rows and keep the source note for each amount visible.
The cost of getting this wrong runs in two directions. A top-up error can create duplicate national renewal spend, because money may go out through the unitary route while national renewals remain exposed. A conversion error can create national lapse or reinstatement exposure, because the national right may need its own renewal handling after conversion. As established above, Article 135(1) EPC is a procedural basis for a national grant procedure, not a substitute for checking each national row.
My rule is to enter the six fields first and compare routes second. For each row, I write the official fee amount, currency, VAT treatment, due date, grace or reinstatement rule, and payment evidence in the same order. Then I mark the row complete only if every field has an entry and a source note. If any row is blank or outside unitary coverage, I stop treating the worksheet as a basis for paying the top-up and preserve the row for the fallback analysis.
The worksheet is also a control against false precision. I do not invent identifiers, deadlines, rates, fees, or dates where the available sources gives none. I record what the official schedule says on the date checked, then keep the evidence beside the number. That way, the final comparison is not a contest between assumptions; it is a review of 17 verified rows, each with the same cost fields and each ready to be tested against the applicable route.

What the available sources does not establish
The absence of a unitary patent renewal fee amount matters because the top-up is a payment exercise before it is a legal slogan. If the available sources has no amount, the worksheet cannot be completed by inference from the headline. Treat every state row as unverified until the official fee, currency, VAT treatment, due date, grace rule, and payment evidence are filled from an authoritative source. A blank amount is not a zero. It is a stop condition.
The same rule applies to the 2026 top-up rate. No 2026 top-up rate appears in the available sources, so do not carry forward a prior-year figure, a rounded estimate, or a figure from commentary. Check the EPO fee schedule for the unitary renewal component, then check each national office for any amount it publishes or requires in the relevant state. If the two sources do not align with the state row you are trying to complete, leave the row open and keep the payment on hold.
No conversion deadline appears in the available sources either. The Article 135(1) EPC snippet identifies the conversion mechanism, but it does not state when a request must be filed, what local procedure applies, or whether late action can be cured. Verify the applicable national deadline and any grace rule with the receiving national office. That check belongs in the worksheet beside the state row, not in a general note, because a deadline that is valid in one state may be useless in another.
The practical rule is narrow: the available sources tells you what to verify, not what to pay. Use it to identify the missing fields, then close those fields from official sources. Until the worksheet is complete, the absence of a verified fee amount, top-up rate, or conversion deadline is itself the reason not to move money.

Worked 17-row worksheet example
This section alone gives the 17-row worksheet example with three checkpoints and zero blank cells allowed. The worksheet is built from 17 rows, 6 fields per row, 2 approvers—IP counsel and finance—and 1 official fee-schedule date. The observed figures to carry into the worksheet are 17 rows, an 18-state UPC list, 3 checkpoints, and 0 blank cells allowed. Treat the worksheet as the control document: if a field is not filled from an official source, it stays visibly unresolved and cannot be treated as cleared.
Checkpoint 1 reconciles the state list. Put the 17-state headline beside the 18-state UPC list and require a written reason for the difference before any row is priced. The artifact columns should begin with state, unitary coverage, and national renewal due-date status, so the reviewer can see whether the row belongs to the top-up set or needs separate treatment. The reconciliation is not a naming exercise; it is the first gate that prevents a payment from being built on the wrong state universe.
Checkpoint 2 captures the six required fields for every row: official fee, currency, VAT treatment, due date, grace rule, and payment evidence. The worksheet should show all six fields for each of the 17 rows, with the official fee-schedule date recorded once at the top so finance can verify which schedule was used. Do not convert, gross up, or round a figure until the currency and VAT fields are sourced. Payment evidence belongs in the same row as the fee data, not in a later email thread, because the purpose of the worksheet is to make each state row auditable at a glance.
The working artifact should therefore read as a compact control table: state; unitary coverage; national renewal due-date status; official fee; currency; VAT treatment; due date; grace rule; payment evidence; counsel note; finance note. The two approvers sign against different risks—IP counsel against coverage and fallback, finance against amount, tax treatment, timing, and proof of payment. A completed worksheet has 17 populated rows, 3 cleared checkpoints, and 0 blank cells allowed; an incomplete one is not a payment instruction.
Decision rules for 2026 renewal review
This section alone gives the if/then rules that operationalize the canonical rule. I treat the 2026 top-up as a release gate, not a payment instruction: no money moves until the 17-row state-by-state worksheet is complete. Each row must carry the official fee, currency, VAT treatment, due date, grace rule, and payment evidence. If any one of those cells is blank, the worksheet fails the gate and I open conversion review under Article 135(1) EPC, which the EPO source describes as the route by which a designated state’s central industrial property office applies the national grant procedure at the applicant’s request.
The first decision rule is therefore mechanical. If the 17-row worksheet has any blank fee, currency, VAT, due-date, grace-rule, or payment-evidence cell, then do not pay the top-up; open conversion review. I do not fill a gap by inference from a neighboring state, and I do not treat a missing VAT note as a harmless formatting issue. A blank cell is a verification failure, and the fallback is conversion review rather than a partial or estimated remittance.
The second rule handles a count mismatch before any totaling. If the UPC/EPO official list shows 18 states and the headline says 17, then reconcile the missing or extra state before totaling; do not average or ignore the gap. I park the payment calculation, identify which state is present in one source and absent in the other, and document the reason for the row count I use. Only after that reconciliation can the worksheet be treated as a stable basis for a 2026 decision.
The third rule applies once the evidence set is clean. If unitary coverage matches all commercial states and all 17 rows are complete, then top-up wins; record the official schedule date and payment evidence. “Complete” means every required cell is populated from the official state record, not merely that a total has been entered. I capture the schedule date alongside the proof of payment so the file shows both what was due and what was done.
I keep these rules separate from the procedural explanation of how the two mechanisms work and from the source reconciliation of the 17-state headline against the 18-member-state material. Those questions are resolved upstream. At this stage I am only running the gate: blank cell, conversion review; count mismatch, reconcile before totaling; full coverage plus complete rows, top-up with dated evidence.
For 2026 renewal review, the practical output is a short decision log attached to the worksheet. It should state which branch was triggered, which cell or state caused it if the branch was adverse, and what record closes the branch. That log turns the headline into an auditable 17-row verification problem rather than a single fee decision.
What to do next
| Step | Action | Why it matters |
|---|---|---|
| 1 | Open the 17-row state-by-state worksheet and confirm every state row is present before touching the 2026 top-up. | The 2026 top-up is a 17-row verification problem, not one fee decision. |
| 2 | Complete all six fields in each row: official fee, currency, VAT, due date, grace rule, and payment evidence. | No top-up is payable until each state row has six completed fields. |
| 3 | Flag any blank state row and stop the top-up payment immediately. | A blank state row triggers the Article 135(1) EPC fallback. |
| 4 | Flag any state row outside unitary coverage and stop the top-up payment immediately. | A state row outside unitary coverage also triggers conversion under Article 135(1) EPC. |
| 5 | Run conversion review under Article 135(1) EPC before the next renewal date if any row is blank or outside unitary coverage. | Conversion under Article 135(1) EPC is the fallback named in the guide. |
| 6 | Release the 2026 top-up only after all 17 rows are complete and no conversion trigger remains. | The canonical decision rule requires the full worksheet before any unitary patent renewal top-up is paid. |
Frequently Asked Questions
Before paying any unitary patent renewal top-up, what must be completed for each of the 17 state rows?
No top-up is payable until each state row has six completed fields: official fee, currency, VAT, due date, grace rule, and payment evidence.
What happens if one of the state rows is left blank?
A blank state row triggers the Article 135(1) EPC fallback.
Does a state row outside unitary coverage change the route?
A state row outside unitary coverage also triggers conversion under Article 135(1) EPC.
How does the guide treat the 17-state top-up for renewal-fee purposes?
The guide treats the 17-state top-up as 17 separate renewal-fee verifications, each with official fee, currency, VAT, due date, grace rule, and payment evidence.
When does the answer about the top-up route change?
That answer changes if any state row is blank or outside unitary coverage, because Article 135(1) EPC conversion becomes the fallback.
What should be checked on the official EPO/UPC page before modeling any top-up?
On the unitary route, the practical check is to verify the current renewal schedule and payment window on the official EPO/UPC page before modeling any top-up, and to confirm on that page how the unitary renewal fee is structured.
Quick answers
| Why is the 2026 top-up described as a 17-row verification problem rather than one fee decision? | The thesis requires a 17-row state-by-state worksheet before any unitary patent renewal top-up is paid. |
| What must be completed in each state row before any top-up is payable? | No top-up is payable until each state row has six completed fields: official fee, currency, VAT, due date, grace rule, and payment evidence. |
| What happens if a state row is blank? | A blank state row triggers the Article 135(1) EPC fallback. |
| What happens if a state row is outside unitary coverage? | A state row outside unitary coverage also triggers conversion. |
| What should be checked on the official EPO/UPC page before modeling any top-up on the unitary route? | The practical check is to verify the current renewal schedule and payment window on the official EPO/UPC page before modeling any top-up, and to confirm on that page how the unitary renewal fee is structured. |
Also worth reading: Patent maintenance fees explained: 30-day audit vs lapse block: Patent maintenance fees explained: 30-day · Patent Sustainability Map: World Patent Body Class Map Flags 33% Overlap—Report or Not?: Patent Sustainability Map: World Patent · Patent Renewal Fees 2026: $7,700 Prune vs Renew Decision: Patent Renewal Fees 2026: $7,700